As
a whole:
Please do not use without the nameplate of the
gear head and motor or the specifications
of the product catalogues, in order to prevent,
hurting, and damaging device etc.
Please do not put your fingers and things into
the openings part of gear or motor, in order
to prevent getting an electric shock, hurting,
catching a fire and damaging device etc.
Please do not use the injured gear head or motor,
in order to prevent hurting, catching a fire etc.
Please do not put off the nameplate.
If the products are reformed by the customers
personally, it no longer belong to the
guarantee scope, and our company doesn't undertake
any responsibility.
|
|
Moving:
When you move it, if it shed off or tilt to one
side, it is very dangerous, please pay more attention.
Assembly:
Please must not put the flammable thing near the
gear head and motor, in order to prevent catching
a fire.
Please do not put the things around motor, which
effect ventilation and cooling,
even burning or catching a fire because of too
heat.
Please do not touch the gear, the top of the motor
shaft and the key slot of the gear with naked
hand,
in order to prevent hurting.
The device may creating the smoke, food machine
etc, please add oil cup in the assembly part,
in order to prevent leaking oil then have a bad
effect on for the products.
Assembly the main machine:
Please set a safe cover about the revolving part,
in order to prevent hurting.
Before linking with the other part machine, please
confirm the revolving direction.
If the direction is not right, which maybe hurt
the gear motor or destroy the device.
Wiring:
Please don't get in touch with terminal, when
you measure insulated resistance,
in order to prevent danger of getting an electric
shock.
Please according to wire diagram and usage manual
links with the electrical source,
in order to prevent getting an electric shock
or catching a fire.
No terminal box, please
strengthen the insulation of the connection part
surely.
At the electrical source cable and the motor wire,
please do not bend, stretch, and clip tightly
excessively,
in order to prevent getting an electric.
The terminal box connects to the ground must be
firmly, in order to prevent getting into electricity.
Please adopt the electrical source to accord with
the nameplate, in order to prevent burning the
motor and catching a fire.
Operation:
During the work, please mustn't get close to or
touch the revolving parts (shaft). If something
or somebody engulfs or hurts,
please turn off the electrical power switch right
away and handle at once.
Please turn off the electrical source switch when
electricity stops, prevent hurting the person
and damaging the device.
Please note, motor with the thermal protector,
when temperature of the motor is unusual, it turn
off the electrical source
automatically, when the temperature of the motor
fall down a fixation data, the motor can work
automatically.
Note: when the motor is
not burned-out, the motor can work automatically.
The
daily check and maintain:
In daily, you should keep the motor operating
in the normal work environment.(Except the special
model)
While checking, please do not get close to or
touch the revolving parts (shaft). Maybe something
or somebody engulfs or hurts
Checking:
Please confirm stock on hand whether or not accord
with the order.Choosing wrong products,
probably lead to damage of motor and damaging
the device etc. |